Natcom Ireland Ltd
Natcom Ireland Ltd

 

MENU

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


Proximity Programming

1104/1/2/3To add a key fob
• Use up or down arrows to select a number between 01 and 499 that has no dots next to it.
• Hold the fob against the controller to the right of the display
• Verify the central dot on the display lights
• Press the up arrow several times until 3 dots are shown on the display
• Press the tick to confirm

To delete a key fob
• Use up and down arrows to select the number of the fob to be deleted
• Press and hold the tick button for 1 second
• The display will flash and the dots will go out. The fob is deleted.
1103/1/2/3To set a master key
• Press and release the button on the reverse of the unit
• Wait until the display shows 000
• Press and release the button on the reverse of the unit again
• The display should show - - - • Present a fob to the reader, one line will rise
• Remove and represent the fob to the reader and hold until STO appears
• Remove key

To add a key
• Present a master key to the unit until r - 0 is displayed.
• Remove key
• Present key to be programmed to the unit
• The unit will bleep and display the new key number. Remove the key
• To return to normal briefly present a master key to the unit

To delete a key
Please contact our Technical Support, call 01 497 7877









Natcom Ireland Ltd

Natcom Ireland Limited || Kenilworth House, Kenilworth Road, Dublin 6, Ireland

PSA Licence 05036

Telephone 01 497 7877 ::: Facsimile 01 497 7254 ::: info@natcom.ie