Natcom Ireland Ltd
Natcom Ireland Ltd

 

MENU

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


Keypad FDI 060 Series:
060-077 & 060-078

• Move the jumper on the rear of the unit to PROG position. The green LED turns on to indicate entry into programming.

• Enter 000 then a number between 3 and 8 (indicates number of digits in the code) then the code itself followed with '#' . e.g entering 00041947# programmes a 4 digit master programming code of 1947.

• Move the jumper on the rear of the unit back to normal position. Keypad returns to normal operation mode.

To enter the door open codes proceed as follows:
• Enter master programming code, the unit enters programming mode and green LED turns on.

• Enter a number between 01 and 22 (user code memory slots ) followed by 0 followed by a number between 3 and 8 (indicates number of digits in code) followed by the code itself and then '#'. e.g entering 01041234# programmes a 4 digit user code of 1234.

To enter the relay activation time proceed as follows:
• Enter 31 followed by a number between 01 and 30 (time in seconds) followed by '#'.

• Keypad returns to normal operation mode after 30 seconds of inactivity and the green LED turns off.

 

Download DGP keypad programming extended guide pdf pdf









Natcom Ireland Ltd

Natcom Ireland Limited || Kenilworth House, Kenilworth Road, Dublin 6, Ireland

PSA Licence 05036

Telephone 01 497 7877 ::: Facsimile 01 497 7254 ::: info@natcom.ie