Natcom Ireland Ltd
Natcom Ireland Ltd

 

MENU

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


Digivoice Decoder Programming

Digivoice Decoder – 1038-35/34 Programming

Briefly press the button on the 4-way decoder.
The LED should come on (NOT flashing).

At the entrance panel (for systems with more than one entrance panel, any panel can be used) press 1 then press the BELL.

Enter the apartment number connected to output A of the decoder and press the BELL.

Now enter the apartment number connected to output B of the decoder and press the BELL.

Enter the apartment number connected to output C of the decoder and press the BELL.

Enter the apartment number connected to output D of the decoder and press the BELL.

The decoder is now programmed and the LED will have gone off.

Repeat the process for the rest of the decoders.

If all four outputs are not being used, after you have finished entering apartment numbers, go back to the decoder and press the button to switch the LED off.









Natcom Ireland Ltd

Natcom Ireland Limited || Kenilworth House, Kenilworth Road, Dublin 6, Ireland

PSA Licence 05036

Telephone 01 497 7877 ::: Facsimile 01 497 7254 ::: info@natcom.ie