Natcom Ireland Ltd
Natcom Ireland Ltd

 

MENU

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


Keypad DGP30

• Switch the programming switch (SW5) on, unit will start beeping every 3 seconds to confirm you are in programming mode.

• Enter 00 (memory Slot for relay times) and then 0505 (sets relay 1 and relay 2 respectively for 5 second activation), a rapid series of beeps confirms successful programming.

• Enter 30 (memory slot for master programming code) then a number between 03 and 08 (indicates number of digits in the code) then the code itself, a rapid series of beeps confirms successful programming. e.g entering 30041947 programmes a 4 digit master programming code of 1947.

• Switch programming switch off, a long beep is heard and keypad returns to normal operation mode.

To enter the door open codes proceed as follows –

• Enter your Master Programming Code, unit will start beeping every 3 seconds to confirm you are in programming mode.

• Enter number between 01 and 13 (memory slot for codes for relay 1) OR a number between 14 and 26 (memory slot for codes for relay 2) then enter a number between 03 and 08 (indicates number of digits in the code) then the code itself. A rapid series of beeps confirms successful programming.

• Press the 'B' OR '#' button, a long beep is heard and keypad returns to normal operation mode.

 

Download DGP keypad programming extended guide pdf pdf









Natcom Ireland Ltd

Natcom Ireland Limited || Kenilworth House, Kenilworth Road, Dublin 6, Ireland

PSA Licence 05036

Telephone 01 497 7877 ::: Facsimile 01 497 7254 ::: info@natcom.ie